Short Ø5,0

92974708381826Impianto-esagono-esterno-Ø5---SHORT_01-ip3--xgraf.jpg

Short Ø5,0

Product codes:
Cod. TCE5005 for height of 5 mm.
Cod. TCE5006 for height of 6 mm.

Straight abutment

Cod. TCFEMD502 - H2
Cod. TCFEMD504 - H4
Cod. TCFEMD506 - H6

Angled abutment 15°

Cod. TCFEMA15°502 - H2
Cod. TCFEMA15°504 - H4
Cod. TCFEMA15°506 - H6

Angled abutment 25°

Cod. TCFEMA25°502 - H2
Cod. TCFEMA25°504 - H4
Cod. TCFEMA25°506 - H6

Castable abutment

Cod. TCFECA50N

Rotating castable abutment

Cod. TCFECA50R

Non-rotating provisional abutment

Cod. TCFEMP50N

Rotating provisional abutment

Cod. TCFEMP50R

Ucla titanium base abutment with cannula

Cod. TCFEUC50N

Ball abutment

Cod. TCFEMS501 - H1
Cod. TCFEMS502 - H2
Cod. TCFEMS503 - H3
Cod. TCFEMS504 - H4

Ball abutment cap

Cod. MSCAP01

Stainless box for ball abutment cap

Cod. MSCON01

Transfer pick-up techinque

Cod. TCFETR50

Screw for short transfer

Cod. TSKVTR

Transfer pull-up technique

Cod. TCFETRST50

Transfer screw

Cod. TCFEVTRST

Analogue for implant Ø5,0

Cod. TCFEAN50

Healing screw

Cod. TCFEVG502 - H2
Cod. TCFEVG504 - H4
Cod. TCFEVG506 - H6

Pick-up transfer screw

Cod. TCFEVPL

Prosthetic screw with torx connection

Cod. TCFEVPR

Drill extension

Cod. TPRFR

Lanceolate drill

Cod. TFRLANC

Cylindrical drill

Cod. TFRC20

Cylindrical drill Ø2,8

Cod. TFRC28

Cylindrical drill Ø3,4

Cod. TFRC34

Cylindrical drill Ø4,2

Cod. TFRC42

Threadformer for cylindrical implant Ø5

Cod. TCEIMS50

Short hand driver

Cod. TDR12C

Long hand driver

Cod. TDR12L

Driver for hand and ratchet

Cod. TCR12L

Micromotor driver for mounter and treahdformer

TCONTR

Parallelism indicator

Cod. TIND

Depth gauge

Cod. TMPRF

Mounter blocking key

Cod. TCHBM

Dynamometric ratchet

Cod. TDINA

Driver for straight MFA

Cod. TCRMFA

Ball abutment driver

Cod. 771CEF

STOP TFRC20

Cod. TSTOPC20XX
(07/85/10/11/13/15)

STOP TFRC28

Cod. TSTOPC28XX
(07/85/10/11/13/15)

STOP TFRC34

Cod. TSTOPC34XX
(07/85/10/11/13/15)

STOP TFRC42

Cod. STOPC42XX
(07/85/10/11/13/15)

Surgical sequence Ø 5.0

For the correct insertion of the cylindrical external hexagon Ø 5.0 implant, we recommend following the surgical protocol:

1. Use the lanceolate drill (TFRLANC) up to the marking (recommended n. revs = 800 rpm).
2. Use the 2 mm start-up drill (TFRC20) with the appropriate stop of the same height as the implant being inserted (recommended n. revs = 800 rpm).
3. Insert the parallelism indicator and check for any disparallelism.
4. Use the cylindrical drill Ø 2.8 (TFRC28) with the appropriate stop (recommended n. revs = 200-400 rpm).
5. Use the cylindrical drill Ø 3.4 (TFRC42) with the appropriate stop (recommended n. revs = 200-400 rpm).
6. Use the cylindrical drill Ø 4.2 (TFRC42) with the appropriate stop (recommended n. revs = 200-400 rpm).
7. In the case of D1 bone density, use the threadformer (TCEIMS50)
8. Insert the implant. Recommended n. of revs 15-25 rpm.
9. Close with the screw cap included in the package.